Reasons Why Carlton Stump Grinder Parts Could Be Wearing Off Too Fast

Reasons Why Carlton Stump Grinder Parts Could Be Wearing Off Too Fast

Carlton stump grinders top the list of the most reputable stump grinding machines on the market. But these machines are not exempted from challenges that the rest of the industrial machines are struggling with. One of the major problems is the wearing off of stump grinder parts. But what could be causing your Carlton stump grinder parts are failing so fast? Well, we have surrounded some of the major causes. Watch out for the factors if your teeth are wearing off rather quickly:

Inferior Quality

Poor quality could be the reason why your wear parts such as the teeth are wearing off very fast. Of the mistakes that people make is buying cheap products without knowing their impact on the longevity of the tool. Cheap products are associated with inferior qualities especially the material that has been used manufacturing the teeth. You need to confirm if the teeth are made from carbide and steel materials. Tungsten carbide tip is highly recommended for the tip to ensure efficient grinding. The body should be made from highest grade of steel. These are two ways that the quality of teeth can be guaranteed. If your teeth do not feature these materials, then it could be the reason why your teeth are wearing off very fast.

Misuse of Stump Grinder

If you are misusing you stump grinding machine, then it could be the reason why your Carlton stump grinder parts are wearing off very fast. Misuse of the stump grinder comes in various ways. First, you could be exposing the teeth to tough conditions than they are designed for. For instance, if you are grinding on rock surfaces, then you are likely to be exposing your machine parts such as the teeth to extreme condition. You could also be exposing the stump grinder parts to high speed thus exposing the wear parts to the rate of wear and tear. So, check if you have been exposing your machine to any of these conditions.

The Operator

Sometimes people blame the machine, the quality of the wear parts or the fake manufacturer without knowing that they are actually the problem. Sometimes the experience of the operator matters a lot. If the operator is not experienced, he might end up misusing the stump grinder thus reducing the longevity of the wear parts. So you need to ensure that the operator is experienced enough. If you are the one operator, get enough training to ensure that you are doing it right.

These are three reasons why you Carlton stump grinder parts could be wearing off too fast.